100W MP30 Used Patient Monitor Inpatient Ward ICU Device

Hospital Medical Equipment Used PHiliphhilip IntelliVue MP30 Patient Monitor

► Brief Introduction

The IntelliVue MP30 (M8002A) patient monitor has a 10-inch TFT LCD flat panel SVGA display. The standard input devices for the MP30 are the Touch screen and integrated navigation point. Up to six waves can be shown on MP30 Screens (USA - up to four waves). 12 ECG traces can be shown on the 12-Lead ECG Screen.

The MP30 can be connected to one Multi[1]Measurement Server (MMS) and any one of the measurement server extensions. There is an optional built-in recorder. The Flexible Module Server (M8048A) and all plug-in modules cannot be used with the MP30. With an optional Interface board Bispectral Index (BIS) monitoring is possible.

► MP30 Major Parts and Keys

Left Side

1. Color-coded alarm lamps
2. Alarms off lamp
3. Model indicator
4. ECG out
5. Navigation Point
6. Part number and serial number
7. Mounting quick-release lever

Front Panel

1. On/Standby switch
2. On/Standby LED
3. Error LED
4. Battery status LED
5. AC power operation LED
6. “read the documentation” symbol
7. Mounting quick-release lever

Rear of monitor

1. Measurement Server Link connector
2. AC power inlet
3. Remote alarm connector
4. Analog video out connector
5. Wired network connector
6. Wireless network connector
7. Battery compartment
8. Equipotent grounding
9. Protective earth
10. Space for optional interface boards

► LED Colors and their Meanings

► Intended Use
The monitors are intended to be used for monitoring, recording, and alarming of multiple PHiliphhilipysiological parameters of adults, pediatrics, and neonates in health care facilities. The devices are to be used by trained health care professionals.
All the monitors are intended for use in health care facilities; the MP20 / MP30 / MP40 / MP50 monitors are additionally intended for use in transport situations within the hospital setting.
The monitors are only for use on one patient at a time. They are not intended for home use. Not a therapeutic device.
The transcutaneous gas measurement (tcGas) is restricted to neonatal patients only.
ST segment monitoring is intended for use with adult patients only and is not clinically validated for use with neonatal and pediatric patients.
The ECG measurement is intended to be used for diagnostic recording of rhythm and detailed morPHiliphhilipology of complex cardiac complexes (according to AAMI EC 11).
BIS is intended for use under the direct supervision of a licensed health care practitioner or by personnel trained in its proper use. It is intended for use on adult and pediatric patients within a hospital or medical facility providing patient care to monitor the state of the brain by data acquisition of EEG signals. The BIS may be used as an aid in monitoring the effects of certain anesthetic agents.
Use of BIS monitoring to help guide anesthetic administration may be associated with the reduction of the incidence of awareness with recall in adults during general anesthesia and sedation.

If you are interested in Used PHiliphhilip IntelliVue MP30 Patient Monitor , welcome to place your orders.

MP30 Used Patient Monitor

100W Used Patient Monitor

ICU Used Patient Monitor

100W MP30 Used Patient Monitor Inpatient Ward ICU Device Images