PHiliph M2735A TOCO Probe For PHiliph FM20 FM30 FM40 FM50 Fetal Monitor

PHiliphh M2735A TOCO+ Probe for PHiliphh FM20 FM30 FM40 FM50 fetal monitor

►Brief Introduction

The PHiliphh M2735A TOCO+ Probe is a medical device used in obstetrics and gynecology for monitoring uterine contractions during labor. "TOCO" stands for tocodynamometry, which is the measurement of uterine contractions. The TOCO+ Probe is designed to be used with fetal monitoring systems, It’s work for PHiliphh FM20 FM30 FM40 FM50 fetal monitor.

► Functional

TOCO+ (Toco dynamometry): The term "TOCO" stands for Toco dynamometry, which is a method used to measure uterine contractions during labor. The TOCO+ Probe is a transducer that is placed externally on the mother's abdomen to detect and measure changes in uterine pressure caused by contractions. This information is essential for monitoring the progress of labor and assessing the well-being of the fetus.

Compatibility: The PHiliphh M2735A TOCO+ Probe is specifically designed to work with PHiliphh fetal monitors such as the FM20, FM30, FM40, and FM50. These fetal monitors are used in obstetric and maternity wards to monitor the fetal heart rate (using a separate fetal heart rate probe) as well as uterine contractions.

Monitoring: When attached to the mother's abdomen, the TOCO+ Probe detects changes in pressure corresponding to contractions. This data is transmitted to the fetal monitor, where it is displayed graphically or numerically. Healthcare providers use this information to assess the frequency, duration, and intensity of contractions, which helps them manage labor and ensure the well-being of both the mother and the baby.

Ease of Use: The TOCO+ Probe is designed to be easy to apply and comfortable for the patient. It typically consists of a soft, elastic belt with a transducer element that is placed over the uterus. The probe is securely attached to the fetal monitor via a cable, allowing continuous monitoring throughout labor.

► How to use

Prepare the Patient: Position the patient comfortably on her back or side, exposing the abdomen. Ensure the abdomen is clean and dry for optimal probe adhesion.

Connect the Probe to the Fetal Monitor: The TOCO+ Probe typically connects to the fetal monitor via a cable. Ensure that the cable is securely plugged into the appropriate port on the monitor.

Apply Gel to the Probe Surface (if necessary): Depending on the design of the TOCO+ Probe and the manufacturer's instructions, you may need to apply ultrasound gel to the surface of the transducer. This gel helps ensure good contact between the probe and the skin, facilitating accurate measurement of uterine contractions.

Position the Probe on the Abdomen: Place the TOCO+ Probe on the mother's abdomen over the fundus (top portion of the uterus) where uterine contractions are most easily detected. The exact placement may vary depending on the stage of labor and the healthcare provider's preference. Typically, the probe is positioned slightly off-center from the midline of the abdomen.

Secure the Probe in Place: Once positioned correctly, secure the TOCO+ Probe in place using the provided elastic belt or straps. Ensure that the probe is snug but not overly tight, as this can affect the accuracy of the measurements and cause discomfort to the patient.

Adjust Sensitivity (if necessary): Some fetal monitors allow you to adjust the sensitivity of the TOCO+ Probe to optimize the detection of uterine contractions. Follow the manufacturer's instructions or consult with the healthcare provider to determine the appropriate sensitivity settings.

Monitor Uterine Contractions: Start the fetal monitor to begin monitoring uterine contractions. The monitor will display graphical or numerical data representing the frequency, duration, and intensity of contractions detected by the TOCO+ Probe.

Reposition the Probe as Needed: Throughout labor, periodically check the position of the TOCO+ Probe to ensure it remains securely in place and continues to provide accurate measurements. Reposition the probe if necessary to maintain optimal contact with the abdomen.

Document Findings: Record the data obtained from the TOCO+ Probe, including the timing, duration, and intensity of contractions, as part of the patient's medical record.

Remove the Probe: After labor and monitoring are complete, carefully remove the TOCO+ Probe from the patient's abdomen. Clean the probe according to the manufacturer's instructions for proper maintenance and reuse.

► Specifications

Thank you for your time and interest in PHiliphh M2735A TOCO+ Probe for PHiliphh FM20 FM30 FM40 FM50 fetal monitor.

Any inquiry will be highly appreciated and thanks for your support.

PHiliph M2735A TOCO Probe

TOCO Probe For PHiliph FM20

PHiliph M2735A TOCO Probe For PHiliph FM20 FM30 FM40 FM50 Fetal Monitor Images