UT-2488 Nihon Kohden ECG Machine Parts Power Supply Board STM0-5 94V-0 E207844

Nihon Kohden cardiofaxS ECG-2250 ECG machine power supply board UT-2488 STM0-5 94V-0 E207844

Nihon Kohden cardiofaxS ECG-2250 ECG machine power supply board UT-2488 Introduction

The power supply board of the Nihon Kohden Cardiofax S ECG-2250 machine is responsible for

providing the necessary power to the ECG machine. It converts the incoming AC power from the

wall outlet to the DC voltage levels required to operate the machine's internal components.

Power boards typically consist of transformers, rectifiers, capacitors, voltage regulators, and

other necessary components. These components work together to ensure a steady and

consistent power supply to the EKG machine.

If there is a problem with the power board, it may affect the overall function of the machine.

Common symptoms of a power strip failure include power fluctuations, intermittent power

outages, or the machine not turning on at all.

In this case, it is recommended to contact a professional repair technician or the manufacturer

for assistance in diagnosing and, if necessary, replacing the power board.

Nihon Kohden cardiofaxS ECG-2250 ECG machine power supply board UT-2488 Specifaction

ECG Machine Storage and daily maintenance

①The instrument should be placed in a ventilated and dry place, and there must be air

conditioning in the room. Do not place the instrument under the window or next to the heater to

avoid showering, heat and moisture. When the instrument is not used for more than ten days, it

should be powered on every other week for one hour each time to prevent corrosion and

damage.

② It is best to use a dedicated power supply system. If you use a voltage stabilizer, you need to

wait until the voltage stabilizer reaches the voltage required by the instrument before turning on

the power switch to avoid damage to the instrument due to excessively high or low voltage.

③ After use, restore the knobs and switches to their original positions, pull out the electrodes

connected to the preamplifier and the stimulator, and then turn off the power switch.

Thank you so much for your attention .If you're interested in UT-2488 Nihon Kohden CardiofaxS ECG-2250 ECG Machine Power Supply Board UT-2488 STM0-5 94V-0 E207844,feel free to contact us .Thank you .

UT-2488 ECG Machine Parts

94V-0 E207844 ECG Machine Parts

ECG Machine Power Supply Board

UT-2488 Nihon Kohden ECG Machine Parts Power Supply Board STM0-5 94V-0 E207844 Images